List of products by brand SM Project

Retrouvez ici toutes les pièces SM Project pour votre TM Racing, pièces aluminium CNC taillé dans la masse

Showing 1-12 of 31 item(s)

SM Project - Brembo...

CNC parts

SM Project - Brembo master-cylinder cap

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

SM Project - Clutch guard...

CNC special parts

SM Project - Clutch guard cover 250/300 2019/..

€53.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots.

SM Project - Ignition guard...

CNC special parts

SM Project - Ignition guard cover 450/530Fi

€53.90

CNC machined ignition cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the shifter, rocks or your boots.

SM Project - Clutch guard...

CNC special parts

SM Project - Clutch guard cover 250/300Fi

€53.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots.

SM Project - Axle blocks...

OEM Parts

SM Project - Axle blocks kit 22mm SMX 2012/..

€69.90

Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery

SM Project - Clutch guard...

CNC special parts

SM Project - Clutch guard cover 85/125/144

€53.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots.

View

SM Project - Axle blocks...

CNC parts

SM Project - Axle blocks kit 25mm

€69.90

Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery

SM Project - Clutch guard...

CNC special parts

SM Project - Clutch guard cover 450/530Fi

€53.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots.

SM Project - Fuel cap Fi...

OEM Parts

SM Project - Fuel cap Fi 2015/2020

€39.00

CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020

SM Project - Fuel cap Fi...

OEM Parts

SM Project - Fuel cap Fi 2015/.. - Bronze - Limited edition

€39.00

CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020

View

SM Project - Rear caliper...

OEM Parts

SM Project - Rear caliper support holder

€39.90

A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes.

SM Project - Brembo...

CNC parts

SM Project - Brembo master-cylinder cap black

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

View

1
2
3